Fact Sheets of the Week

Featured Company:

Home > Civil Tech. > Smart Concrete

Smart Concrete

The Need

Concrete has been widely used for many years as a composite material for various types of structures. One of the weakness of concrete is that it cannot withstand tension which can cause cracks easily. There has been a huge demand to monitor concrete structures cracking and preventing them from propagating further. These efforts are important for timely repair, safety and long-term durability of critical structures. Non-destructive evaluations, such as attaching or embedding sensors into structures, have been used in many ways to accommodate the demand, yet the tests are considered expensive.

The Technology

Smart concrete was developed Dr. Deborah D.L. Chung from State University of New York at Buffalo. Smart concrete is reinforced by carbon fiber as much as 0.2% to 0.5% of volume to increase its sense ability to strain or stress while still has good mechanical properties.

By adding small amount of short carbon fiber into concrete with a conventional concrete mixer, the electrical resistance of concrete increases in response to strain or stress. As the concrete is deformed or stressed, the contact between the fiber and cement matrix is affected, thereby affecting the volume electrical resistivity of the concrete. Strain is detected through measurement of the electrical resistance. So, the smart concrete has the ability to sense tiny structural flaws before they become significant, which could be used in monitoring the internal condition of structures and following an earthquake.

In addition, the presence of the carbon fibers also controls the cracking so that the cracks do not propagate catastrophically, as in the case of conventional concrete.

Some of the application of smart concrete are:

The Benefits

Status

Dr. Deborah Chung has patented this technology and performed several further researches and tests for potential application, such as a lab test of the use of smart concrete for weighing moving vehicles. Several papers regarding this technology have been published in several journals and magazines.

Barriers

Although this technology has been through extensive laboratory testing, it still needs field testing and it is not yet available in the market.

Points of Contact

Refrences

  1. "During an Earthquake, Smart Concrete Could Fare Better Than Conventional Materials", University at Buffalo News, January 26, 1994,
  2. Pu-Woei Chen and D.D.L. Chung, "Carbon Fiber Reinforced Concrete as an Intrinsically Smart Concrete for Damage Assessment During Static and Dynamic Loading," ACI Mater. J. 93(4), 341-350 (1996).
  3. "Smart Concrete Would Determine Weight of Trucks as They Travel on a Highway", University at Buffalo News, May 19, 1999,

Disclaimer Statement

Neither the Construction Industry Institute nor Purdue University in any way endorses this technology or represents that the information presented can be relied upon without further investigation.

Comments

Add Comment

This site is operated and maintained by the Division of Construction Engineering & Management, Purdue University as a not-for-profit service to the construction industry